Print this page
Wednesday, 06 April 2011 19:04

Model Maker

Rate this item
(0 votes)

Synonyms: Patternmaker; model builder; modeller

Job profile

Definition and/or description

DEF12

Constructs scale models of objects or situations. Builds and moulds models, using clay, metal, wood, plastics, rubber or other materials, depending on industry for which model is constructed. Uses experience, skills and special knowledge to understand the customer’s requirements expressed in documents, drawings, sketches, etc.; selects appropriate methods, tools and technological processes; designs and manufactures the model; verifies its correspondence to the requirements and specifications. May make frames, showcases, etc. for models and glaze them. May disassemble or otherwise utilize models that are no longer usable. May repair or modify existing models. May test, demonstrate and operate model at the place of manufacture or at the customer’s premises. May instruct others how to use model.

Related and specific occupations

RELOCC7

Model maker or patternmaker designated according to industry (e.g., model maker (aut. mfg.), model maker (jewellery-silver), model maker (pottery and porcelain)), to principal material used (e.g., model maker (wood), model maker (sheet-metal)) or to specific class of products (relief-map modeller, model maker (house appliances), etc.) (DOT).

Tasks

TASK7

Abrading; adjusting; aligning; analysing; applying; ascertaining; assembling; blueprinting; bolting; bonding; boring; brazing; brushing; building; carving; casting; checking; chiselling; clamping; cleaning; coating; conferring; connecting; constructing; consulting; correcting; covering; cutting; deburring; demonstrating; designing; determining; disassembling; disconnecting; dismantling; drawing; drilling; estimating; examining; fabricating; fastening; filing; filling; finishing; fitting; forming; framing; glazing; grinding; gluing; hammering; hand-finishing; indicating; inspecting; installing; instructing; interpreting (drawings, etc.); joining; lacquering; laying out; lifting; machining; maintaining; making; manufacturing; marking; measuring; melting; mending; milling; mixing; modifying; moulding; moving; painting; performing; placing; planing; planning; polishing; positioning; pouring; preparing; pressing; producing; pulling; punching; pushing; reading (specifications, etc.); reassembling; recasting; repairing; replacing; removing; riveting; sanding; scraping; screwing; scribing; selecting; servicing; setting-up; shaping; sharpening; shaving; sketching; smoothing; soldering; spreading; studying; testing; transporting; trimming; tuning; using; utilizing; verifying; waxing; welding; wiring.

Hazards

Accident hazards

ACCHA1

– Injuries during work with machining equipment, such as lathes, drills, discs, shapers and various cutting and hand tools (e.g. cutters, wrenches, screwdrivers, chisels, etc.);

– Stabs and cuts caused by knives, sharp objects, hand tools, banging on metal pieces, etc.;

– Slips, trips and falls, especially when moving raw materials and completed heavy models;

– Falls on level surfaces, especially on wet, slippery and greasy floors;

– Crushing of toes as a result of falls of heavy objects on feet;

– Burns and scorches as a result of contact with hot materials or heated tools; soldering, brazing and welding operations, etc.;

– Eye injuries from splinters and flying objects during grinding, machining, abrading, polishing, boring and similar operations; as a result of splashes of corrosive and reactive chemicals, etc.;

– Fires and explosions caused by flammable and explosive substances (e.g., solvents) or by flames originating from flame and arc cutting and welding operations, etc;

– Electric shocks caused by contact with defective electric and electromechanical equipment.

Physical hazards

PHYSIC14

– Hazards commonly associated with a specific industry (e.g., exposure to excessive heat from furnaces in pottery industry).

Chemical hazards

CHEMHA4

– Chronic poisoning and/or skin diseases as a result of exposure to a wide range of industrial chemicals (e.g. solvents, lacquers, varnishes, cleaners, paint removers and thinners);

– Eye irritation, dizziness, nausea, breathing problems, headaches, etc., caused by contact with irritating substances (e.g., wood and metal dusts, fumes and solvents);

– In some industries, pronounced increased risk of certain cancers due to exposure to wood products, dust, plastics, solvents, etc.;

– Gastrointestinal disturbances as a result of chronic ingestion of adhesives, paints, solvents, etc.;

– Excessive exposure to ozone during arc welding.

Biological hazards

BIOHAZ15

Biological hazards may be encountered by model makers working in an environment where they are potentially exposed to micro-organisms, allergenic plants, hair, fur, etc.

Ergonomic and social factors

ERGO11

– Acute musculoskeletal injuries caused by physical overexertion and incorrect combination of weight and posture during lifting and moving heavy loads of raw materials and completed models;

– Cumulative trauma disorders, including carpal tunnel syndrome, caused by long-time repetitive work;

– Tiredness and general ill feeling;

– Psychological stress resulting from the fear of making unnoticed flaws in the model that will be replicated in mass production items and when trying to meet difficult or unusual job specifications or tight time schedules.

 

Back

Read 5317 times Last modified on Friday, 20 May 2011 20:32