Banner 10

 

64. Agriculture and Natural Resources Based Industries

Chapter Editor: Melvin L. Myers


Table of Contents

Tables and Figures

General Profile
Melvin L. Myers

     Case Study: Family Farms
     Ted Scharf, David E. Baker and Joyce Salg

Farming  Systems

Plantations
Melvin L. Myers and I.T. Cabrera

Migrant and Seasonal Farmworkers
Marc B. Schenker

Urban Agriculture
Melvin L. Myers

Greenhouse and Nursery Operations
Mark M. Methner and John A. Miles

Floriculture
Samuel H. Henao

Farmworker Education about Pesticides: A Case Study
Merri Weinger

Planting and Growing Operations
Yuri Kundiev and V.I. Chernyuk

Harvesting Operations
William E. Field

Storing and Transportation Operations
Thomas L. Bean

Manual Operations in Farming
Pranab Kumar Nag

Mechanization
Dennis Murphy

     Case Study: Agricultural Machinery
     L. W. Knapp, Jr.

Food  and Fibre Crops

Rice
Malinee Wongphanich

Agricultural Grains and Oilseeds
Charles Schwab

Sugar Cane Cultivation and Processing
R.A. Munoz, E.A. Suchman, J.M. Baztarrica and Carol J. Lehtola

Potato Harvesting
Steven Johnson

Vegetables and Melons
B.H. Xu and Toshio Matsushita   


Tree,  Bramble and Vine Crops

Berries and Grapes
William E. Steinke

Orchard Crops
Melvin L. Myers

Tropical Tree and Palm Crops
Melvin L. Myers

Bark and Sap Production
Melvin L. Myers

Bamboo and Cane
Melvin L. Myers and Y.C. Ko

Specialty  Crops

Tobacco Cultivation
Gerald F. Peedin

Ginseng, Mint and Other Herbs
Larry J. Chapman

Mushrooms
L.J.L.D. Van Griensven

Aquatic Plants
Melvin L. Myers and J.W.G. Lund

Beverage Crops

Coffee Cultivation
Jorge da Rocha Gomes and Bernardo Bedrikow

Tea Cultivation
L.V.R. Fernando

Hops
Thomas Karsky and William B. Symons

Health  and Environmental Issues

Health Problems and Disease Patterns in Agriculture
Melvin L. Myers

     Case Study: Agromedicine
     Stanley H. Schuman and Jere A. Brittain

Environmental and Public Health Issues in Agriculture
Melvin L. Myers

Tables

Click a link below to view table in article context.

1. Sources of nutrients
2. Ten steps for a plantation work risk survey
3. Farming systems in urban areas
4. Safety advice for lawn & garden equipment
5. Categorization of farm activities
6. Common tractor hazards & how they occur
7. Common machinery hazards & where they occur
8. Safety precautions
9. Tropical & subtropical trees, fruits & palms
10. Palm products
11. Bark & sap products & uses
12. Respiratory hazards
13. Dermatological hazards
14. Toxic & neoplastic hazards
15. Injury hazards
16. Lost time injuries, United States, 1993
17. Mechanical & thermal stress hazards
18. Behavioural hazards
19. Comparison of two agromedicine programmes
20. Genetically engineered crops
21. Illicit drug cultivation, 1987, 1991 & 1995

Figures

Point to a thumbnail to see figure caption, click to see the figure in the article context.

AGR010F2AGR010F3AGR030F2AGR030F3AGR280F1AGR280F2AGR290F3AGR290F1AGR290F4AGR290F2AGR070F1AGR070F4AGR070F6AGR100F1AGR100F2AGR100F3AGR100F4AGR100F5AGR100F6AGR100F7AGR100F8AGR100F9AG100F10AGR110F1AGR070F5AGR130F8AGR200F1AGR180F3AGR180F2AGR180F5AGR180F4AGR180F6AGR180F7AGR180F8AGR180F9AGR370T1   AGR380F2AGR380F1AGR410F1


Click to return to top of page

Thursday, 10 March 2011 15:11

Case Study: Agricultural Machinery

Adapted from 3rd edition, “Encyclopaedia of Occupational Health and Safety”.

Agricultural machinery is designed to till the soil and render it more suitable for crop growth, to sow seeds, to apply agricultural chemicals for improved plant growth and control of pests and diseases, and to harvest and store the mature crops. There is an extremely wide variety of agricultural machines, but all are essentially a combination of gears, shafts, chains, belts, knives, shakers and so on, assembled to perform a certain task. These parts are usually suspended in a frame which may be either stationary or, as is more often the case, mobile and designed to perform the desired operation while moving across a field. The major groups of agricultural machines are: soil tillage machines; planting machines; cultivating machines; forage harvesting machines; grain, fibre, vegetable, and fruit and nut harvesting machines; agricultural chemical applicators; transport and elevating machines; and sorting and packaging machines.

Soil tillage machines. These include ploughs, tillers, subsoilers, harrows, rollers, levellers, graders and so on. They are designed to turn, agitate, level and compact the soil to prepare it for planting. They may be small in size and require only a small power source (as in the case of a one-person roto-tiller for tilling a rice paddy), or they may be large and require a considerable power source (as in the case of a combined subsoiler, drill and harrow).

Planting machines. These include planters, drills, broadcast seeders and so on and are designed to take seeds from a hopper or bin and insert them in the soil at a predetermined depth and spacing or spread them uniformly over the ground. Planters may be of simple design and comprise a single-row seeding mechanism, or they may be highly complex (as is the case with the multi-row planter with attachments that simultaneously add fertilizer, pesticides and herbicides).

Cultivating machines. These include rotary hoes, cultivators, weeders (mechanical and flame) and so on. They are used to eradicate undesirable weeds or grasses which compete with the plant for soil moisture and make the harvest of the crop more difficult. They also improve the soil tillage so as to make it more absorptive of rain.

Forage harvesting machines. These include mowers, choppers, balers and so on and are designed to sever the stems of roughage crops from their roots and prepare them for storage or immediate use. The machines also vary in their complexity: the simple mower merely cuts the crop, whereas the chopper will not only separate the stalk from the root but will also chop the entire plant into small pieces and load it into a vehicle, which may be a towed wagon. Crimpers, which crush or break the stems of plants, are often used to expedite the field-drying process of fodder crops to prevent spoilage, especially of legumes that will be placed in dry storage or baled. Pelleting machines are used to compress fodder crops into compact cubes for mechanical feeding of livestock. Balers are used to compress fodder into square or round bales to facilitate storage and handling. Some bales are small enough (20 to 40 kg) to handle manually, while others may be so large (400 to 500 kg) as to require mechanical handling systems.

Grain and fibre harvesting machines. These include reapers, binders, corn pickers, combines, threshers and so on. They are used to remove the ripe grain or fibre from the plant and place it in a bin or bag for transport to the storage area. Grain harvesting may involve the use of a number of machines, such as a reaper or binder to cut the standing grain, a wagon or truck to transport the crop to the threshing or separating machines and vehicles to transport the grain to a storage area. In other cases many of these functions may be performed by a single machine, the combine harvester (figure 1), which cuts the standing grain, separates it from the stalk, cleans it and collects it in a bin, all while moving through the field. Such machines will also load the grain into transport vehicles. Some machines such as cotton pickers and corn pickers may operate selectively and remove only the grain or fibre boll from the stem or stalk.

Figure 1. Combine for harvesting wheat without an enclosed cabin.

AGR070F5

Vegetable harvesting machines. These include diggers and lifters, and are designed either to dig the crops from the earth and separate them from the soil or to lift or pull the plant free. The potato digger, for example, may form part of a potato combine comprising a sorting, grading device, polisher, bagger and elevator. At the other extreme is the simple two-wheeled, bladed sugar-beet lifter which is followed by hand labourers.

Fruit and nut harvesting machines. These machines are used to harvest berries, fruit and nuts. They may be as simple as a tractor-mounted, vibrating tree shaker which separates the ripe fruit from the tree. Or they may be as complex as the ones which harvest the fruit, catch the falling fruit, place it in a storage container and later transfer it to transport vehicles.

Transport and elevating machines. These also vary considerably in size and complexity ranging, for example, from a simple wagon comprising merely a platform on wheels to a self-loading and stacking transport unit. Inclined chain, flight or belt conveyors or other mechanical handling devices are used to move bulky material (hay, straw, ear corn and so on) from wagon to storage or from one location in a building to another. Screw conveyors are used to move granular material and grain from one level to another, and blowers or pneumatic conveyors are used to move light materials horizontally or vertically.

Agricultural chemical applicators. These are used to apply fertilizers to stimulate plant growth or herbicides and pesticides to control weeds and pests. The chemicals may be liquid, powdered or granular, and the applicator distributes them either by pressure through a nozzle or by centrifugal force. Applicators may be portable or vehicle-mounted; the use of aircraft for chemical application is growing rapidly.

Sorting and packaging machines. These machines are usually stationary. They may be as simple as a fanning mill, which grades and cleans grain merely by passing it over a series of screens, or as complex as a seed mill, which will not only grade and clean but also, for example, separate different types of seeds. Packaging machines usually form part of a sophisticated grading system. They are used primarily for fruit and vegetables and may wrap the produce in paper, bag it or insert it into a plastic container.

Power plants. Electric motors may be used to drive stationary equipment permanently located near a mains supply; however, since many agricultural machines are mobile and must operate in remote areas, they are usually powered by an integral petrol engine or by a separate engine such as that of a tractor. Power from a tractor may be transmitted to the machine via belt, chain, gear or shaft drives; most tractors are fitted with a power take-off coupling specially designed for this purpose.

 

Back

Thursday, 10 March 2011 15:13

Rice

Rice is the staple food for Asian people; it is prepared by cooking or ground as flour for bread making, thus helping to feed the rest of the world population. Various kinds of rice are produced to suit the taste of the consumers. Rice cultivation is done either in marshy, lowland areas with plenty of water or in plateau or hilly regions where natural rainfall provides adequate amounts of water.

Cultivation Process

Rice can be cultivated either by hand or by partial or full mechanization, according to the technological development of the country and the need for productivity. Whatever kind of operation is done, the following step-by-step processes are necessary.

  1. Ploughing. The land is ploughed in three stages to eliminate lumps and to make soil as soft and muddy as possible. Buffalo, oxen or cows usually pull the ploughs, though the use of mechanical equipment is increasing.
  2. Weeding is carried out three times by irrigating the land for 5 days at a time and then letting it dry for 5 days. At the end of each cycle, the land is beaten with a heavy wooden tool to kill off young weeds so they may be used as natural fertilizer.
  3. Preparation of seedlings. The seeds are soaked in a large water-filled jar with appropriate concentrations of salt added to make the healthy seeds sink. These healthy seeds are then thoroughly washed, soaked overnight, wrapped in a thick cloth or sack for 2 nights to germinate, sown in the area prepared for them and left to grow for approximately 30 days.
  4. Transplantation. The young plants, in bunches of 3 to 5, are thrust into the mud in rows and grown for 10 days. After about a total of 45 days, the plant is fully grown and begins to bear seeds.
  5. Harvesting. When the plant is about 100 days old, it is usually reaped by hand (see figure 1); sickles or similar tools are used for cutting the bearing grains off.
  6. Drying is done in the open air in the sun, to make the moisture content fall below 15%.
  7. Threshing separates the grain, with its husk or glume, from the stalk. Traditionally, buffaloes or oxen are used to slowly drag the threshing combs over the stalk to force out the grain. Many places use locally made machines for this.
  8. Storage. Grains and hays are stored in barns or silos.

 

Figure 1. Harvesting of rice plants by hand in China, 1992

AGR130F8

Lenore Manderson

Hazards

Common and specific hazards are as follows:

  • Poor housing, low sanitary standards, inadequate nourishment and the need to drink large quantities of water, which is not always pure, lead to general weakness and fatigue, possible sunstroke, intestinal troubles and diarrhoea.
  • Most injuries caused by farm machinery occur when the workers are not familiar with the machines. Muscles, bones and joints are intensively used, both in dynamic and static loads, causing physical fatigue and resulting in the reduction of work capacity and an increase in traumatic injuries and accidents. Children and adolescents, as well as migrant workers, die from farm injuries each year.
  • Chemical agents, such as fertilizers, strong weedkillers, pesticides and other extensively used substances, increase the hazards both for the workers and the animal or plant foods they consume (e.g., fish, field crabs, water plants, mushrooms, medicinal herbs, field rats or even contaminated water).
  • Diseases (e.g., malaria, tetanus, hookworm, schistosomiasis, leptospirosis, hay fever, farmer’s lung, dermatitis, blepharitis, conjunctivitis, common cold and sunstroke) are very common, as are nutritional disorders (e.g., protein deficiency, toxins), alcoholism, heavy smoking and other addictive habits.
  • The most common occupational diseases are skin diseases. These include: redness and blisters from prickly rice leaves; abrasions and skin injuries caused by prickly plants; calluses of the palms, hands, knees and elbows caused by bad posture and the use of hand tools; skin fungal infections (tinea) due to epidermophytes and Monilia (candida), which may be complicated by secondary sensitization, redness and blisters, frequently due to Staphylococcus bacteria; vesicular dermatitis (small blisters) on the feet sometimes attributed to Rhizopus parasiticus; itch commonly caused by the penetration of the skin by Ancylostoma (hookworms); schistosome dermatitis caused directly or indirectly by contact with water containing blood flukes from nonhuman hosts; and redness, blisters and oedema resulting from insect stings.
  • Respiratory diseases due to organic and inorganic dusts and synthetic chemicals are common. Gram-negative bacterial endotoxin levels in air are high in some countries. Silage gas poisoning of high nitrate soils is also a health problem.
  • Climatic agents such as heat, heavy rain, humidity, high wind, storms and lightning strike both workers and cattle.
  • Psychological stress factors such as economic problems, sense of insecurity, lack of social standing, lack of educational opportunities, lack of prospects and risk of unexpected calamities are particularly common in the developing countries.

 

Safety and Health Measures

Working conditions should be improved and the health hazards reduced through increased mechanization. Ergonomic interventions to organize the work and working equipment, and systematic training of the body and its movements to ensure good working methods, are essential.

Necessary medical preventive methods should be strictly applied, including the introduction of first aid instruction, the provision of treatment facilities, health promotion campaigns and medical surveillance of workers.

Improvement of housing, sanitary standards, accessible potable water, nutritional environmental hygiene and economic stability are essential for the quality of life of rice field workers.

Applicable International Labour Organization (ILO) Conventions and Recommendations should be followed. These include:

  • The Minimum Age (Agriculture) Convention, 1921 (No.10), provides that children under the age of 14 years may not be employed or work in any public or private agricultural undertakings, or in any branch thereof, when school is in session.
  • The Night Work of Children and Young Persons (Agriculture) Recommendation, 1921 (No.14), requires that each Member State regulate the employment of children under the age of 14 years in agricultural tasks at night, leaving not less than 10 consecutive hours for them to rest. For young persons between the age of 14 and 18 years, the period of rest must consist of not less than 9 consecutive hours.
  • The Plantations Convention, 1958 (No.110), provides that every recruited worker shall be medically examined. This Convention is obviously of great importance for workers of all ages.
  • The Maximum Weight Convention, 1967 (No.127), identified optimum loads that can be handled by 90% of workers for all routine and repetitive manual-handling tasks.

 

Back

Thursday, 10 March 2011 15:16

Agricultural Grains and Oilseeds

Several plants in the grass family, including wheat, rye, barley, oats, corn, rice, sorghum and millet, are valuable agricultural commodities, representing the largest effort in production agriculture. Grains provide a concentrated form of carbohydrates and are an important source of food for animals and humans.

In the human diet, grains make up about 60% of the calories and 55% of the protein, and are used for food as well as beverages. Bread is the most commonly recognized food product made from grains, although grains are also important in the production of beer and liquor. Grain is a basic ingredient in the distillation of neutral spirits that produce liquors with the taste and aroma of grain. Grains also are used to make feed for animals, including pets, working animals and animals raised in the production of meat products for human consumption.

Grain production can be traced to the beginning of civilization. In 1996, world production of cereal grains was 2,003,380,000 tonnes. This volume has increased more than 10% since the mid-1980s (FAO 1997).

Three of the major grains produced for their oil, also called oilseeds, are soybean, rapeseed and sunflower. Although ten different types of oilseed crops exist, these three account for the majority of the market, with soybean as the leader. Virtually all oilseeds are crushed and processed to produce vegetable oils and high-protein meals. Much of the vegetable oil is used as salad or cooking oils, and meal is used predominantly in animal feeds. World oilseed production in 1996 was 91,377,790 tonnes, almost a 41% increase since 1986 (FAO 1997).

The production of grains and oilseeds is affected by regional factors such as weather and geography. Dry soils and environments restrict corn production, while moist soils deter wheat production. Temperature, precipitation, soil fertility and topography also affect the type of grain or oilseed that can be successfully produced in an area.

For production of grain and oilseed crops, work falls into four areas: seed bed preparation and planting, harvest, storage and transportation of the crop to market or processing facilities. In modern agriculture, some of these processes have changed completely, but other processes have changed little since early civilization. However, the mechanization of agriculture has created new situations and safety issues.

Hazards and Their Prevention

All tools used in grain harvest—from complex combines to the simple scythe—have one aspect in common: they are hazardous. Harvest tools are aggressive; they are designed to cut, chew or chop plant materials placed into them. These tools do not discriminate between a crop and a person. Various mechanical hazards associated with grain harvesting include shear-point, pull-in, crush-point, entanglement, wrap-point and pinch-point. A combine pulls in cornstalks at a rate of 3.7 metres per second (m/s), too quickly for humans to avoid entanglement, even with a normal reaction time. Augers and PTO units used to move grain, rotate and have wrapping speeds of 3 m/s and 2 m/s, respectively, and also pose an entanglement hazard.

Agricultural workers also can experience noise-induced hearing loss from large-horsepower machinery and equipment used in crop production. Axial-vane fans that force heated air through a bin or storage structure to dry grain can generate noise levels of 110 dBA or more. Since grain-drying units often are located near living quarters and are operated continuously throughout a season, they often result in substantial hearing loss in farmworkers as well as family members over long periods of time. Other sources of noise that can contribute to hearing loss are machinery such as tractors, combines and conveying equipment, and grain moving through a gravity spout.

Agricultural workers also can be exposed to significant suffocation hazards by engulfment either in flowing grain or collapsing grain surfaces. A person caught in grain is almost impossible to rescue because of the tremendous weight of grain. Workers can prevent engulfment in flowing grain by always turning off all power sources to the unloading and transporting equipment before they enter an area and locking shut all gravity flow gates. Engulfment in a collapsed grain surface is difficult to prevent, but workers can avoid the situation by knowing the history of the storage structure and the grain it contains. All workers should follow confined-space entry procedures for physical engulfment hazards when working with grain.

During the harvest, storage and transportation of grains and oilseeds, agricultural workers are exposed to dusts, spores, mycotoxins and endotoxins that can be harmful to the respiratory system. Biologically active dust is capable of producing irritation and/or allergic, inflammatory or infectious responses in the lungs. Workers can avoid or reduce their exposure to dust, or wear personal protective equipment such as mechanical filter respirators or air-supplied respirators in dusty environments. Some handling and storage systems minimize the creation of dust, and additives such as vegetable oils can keep dust from becoming airborne.

In some conditions during storage, grain can spoil and emit gases that pose a suffocation hazard. Carbon dioxide (CO2) can collect above a grain surface to displace oxygen, which can cause impairment in workers if oxygen levels drop below 19.5%. Mechanical filter respirators are useless in these situations.

Another hazard is the potential for fires and explosions that can occur when grains or oilseeds are stored or handled. Dust particles that become airborne when grain is moved create an atmosphere ripe for a powerful blast. Only an ignition source is needed, such as an overheated bearing or a belt rubbing against a housing component. The biggest hazards exist at large port elevators or inland community elevators where huge volumes of grain are handled. Regular preventive maintenance and good housekeeping policies minimize the risk of possible ignition and explosive atmospheres.

Chemicals used at the beginning of the crop production cycle for seed-bed preparation and planting also can pose hazards for agricultural workers. Chemicals can increase soil fertility, reduce competition from weeds and insects and boost yields. The biggest concern for agricultural chemicals hazards is long-term exposure; however, anhydrous ammonia, a compressed liquid fertilizer, can cause immediate injury. Anhydrous ammonia (NH3) is a hygroscopic, or water-seeking, compound, and caustic burns result when it dissolves body tissue. Ammonia gas is a strong lung irritant, but has good warning properties. It also has a low boiling point and freezes on contact, causing another type of severe burn. Wearing protective equipment is the best way to reduce risk of exposure. When exposure occurs, first aid treatment requires immediately flushing of the area with plenty of water.

Grain production workers also are exposed to potential injury from slips and falls. A person can die from injuries in a fall from a height as low as 3.7 m, which is easily exceeded by operator’s platforms on most machinery or grain storage structures. Grain storage structures are at least 9 and up to 30 m tall, reachable only by ladders. Inclement weather can cause slippery surfaces from rain, mud, ice or snow build-up, so the use of guards, handrails and footwear with non-slip soles is important. Devices such as a body harness or lanyard also can be used to arrest the fall and minimize injury.

 

Back

Thursday, 10 March 2011 15:17

Sugar Cane Cultivation and Processing

Adapted from 3rd edition, “Encyclopaedia of Occupational Health and Safety”.

Cultivation

Sugar cane is a hardy crop that is cultivated in tropical and sub-tropical regions for its sucrose content and by-products such as molasses and bagasse (the waste fibrous residue). The plant grows in clumps of cylindrical stalks measuring from 1.25 to 7.25 cm in diameter and reaching 6 to 7 m in height. The cane stalks grow straight upward until the stalk becomes too heavy to hold itself up. It then lies on its side and continues to grow upward. This results in a mature cane field lying on top of itself in a mesh pattern. The sugar cane stalks contain a sap from which sugar is processed. Sugar cane is grown throughout the Caribbean, Central and South America, India, the Pacific Islands, Australia, Central and South Africa, Mauritius and the southern United States. Sugar cane’s main use is for sugar; however, it can be fermented and distilled to produce rum. Bagasse, the cellulose material that remains after pressing, may be used in the production of paper and other products or as a fuel source.

Under favourable conditions and the appropriate use of pesticides and fertilizers, cane grows rapidly. To ensure the maximum sugar content of 1 to 17% of total weight, the cane must be harvested immediately after it reaches its final growth period. The cane fields are burned prior to harvest, to eliminate weeds (without destroying the crop) and to destroy snakes, dangerous insects and other pests that live in the dense growth of the cane fields. Harvesting is done either by hand (machetes are used to cut the cane) or by a sugar cane harvesting machine. Mechanization of sugar cane harvesting has become more prevalent during the 1990s. However, hand harvesting still occurs in many parts of the world, as well as in field locations that are not conducive for harvesting equipment. Large numbers of seasonal or migrant labourers are employed during cane harvesting, especially in areas of hand harvesting.

To retain the sugar content, the cane has to be processed as soon as possible after harvesting; therefore the processing plants (mills) are located near the major areas of sugar cane production. The crop is transported to the mills by tractors, semi trucks or, in some areas, by internal rail systems.

Hazards and their prevention

In areas where hand harvesting prevails, many of the injuries are machete related. These injuries can range from minor cuts to the severing of body parts. Also, the machete is the tool that is most commonly used by the less skilled workers on the farm or plantation. Keeping the machete sharp aids in reducing injuries, since with a sharp machete the worker does not have to swing as hard and can maintain better control over the machete. There are also instances of workers getting into fights with machetes. Safety gloves armoured with chain mesh have been developed to provide protection for the hand from machete-related injuries. The use of steel-toed boots and arm and leg guards will also reduce these types of injuries. Boots will also provide some protection from snake bites. Working with cane also can very easily produce injuries and cuts to the eyes. Eye protection is recommended during hand harvesting, where workers are exposed to the cane stalks. Since cane is grown in tropical and sub-tropical locations, workers also need to be concerned about heat-related health problems. This can be exacerbated due to use of the necessary protective clothing. These regions are also areas of high levels of sun exposure, which can result in various types of skin cancer conditions. Precautions need to be taken to limit or protect against sun exposure.

Manual harvesting with machetes can also result in musculoskeletal injuries from the repetitive motions and physical effort. The size of the machete, sharpness and frequency of cutting strokes are factors that affect this. See also the article “Manual operations in farming” in this chapter.

Precautions need to be taken to prevent infection when cuts and abrasions occur. Where the harvesting has become mechanized, hazards exist that are associated with the particular machine being used. These are similar to those of other agricultural harvesting equipment.

Pesticides and other chemicals may involve toxic risks that can lead to poisoning through skin absorption or inhalation. People who apply the pesticides need to be instructed on the hazards of the operation and provided with protective clothing and adequate washing facilities. Their equipment needs to be maintained and repaired as needed in order to prevent spills. Back-pack sprayers are particularly prone to develop leaks that will cause spillage onto the person. Aerial applications of pesticides can affect other people that are in the area of the application. Also, when pesticides are applied, the product label provides both legal and practical requirements for handling and disposal after use, as well as listing time intervals after which it is safe for people to re-enter the field.

Sugar Cane Mills (Processing Plants)

The sugar cane industry is concerned with more than the production of food for human consumption. Certain kinds of sugar and sugar residues provide nutritious supplementary food for animals, and various products of commercial significance are obtained from the raw material and its by-products.

Principal by-products are saccharose, glucose, levulose, raffinose, pectin, waxes and betaines. Subproducts are stalks (used for fodder), bagasse, rum and molasses. Among products manufactured on an industrial scale are saccharose octacetate, ethyl alcohol and acetic, citric, glutamic, oxalic, formic and saccharic acids. Paper and hardboard are produced industrially from bagasse. Bagasse can also, when dried, be used as a biogas source or as fuel in the sugar mill.

In the sugar mill, the cane is crushed and the juice extracted by heavy rollers. The juice contains saccharose, glucose, levulose, organic salts and acids in solution, and is mixed with bagasse fibres, grit, clay, colouring matter, albumin and pectin in suspension. Because of the properties of albumin and the pectin, the juice cannot be filtered cold. Heat and chemicals are required to eliminate the impurities and to obtain saccharose.

The mixture is clarified by heating and the addition of lime-based precipitants. Once clarified, the juice is concentrated by vacuum evaporation until it precipitates in the form of grayish crystals. The concentrated juice, or molasses, is 45% water. Centrifugal treatment produces granulated sugar of a grayish hue (brown sugar), for which there is a market. White sugar is obtained by a refining process. In this process, the brown sugar is dissolved with various chemicals (sulphuric anhydride, phosphoric acid) and filtered with or without bone black, according to the purity desired. The filtered syrup evaporates under a vacuum until it crystallizes. It is then centrifuged until a white crystalline powder is obtained.

Hazards and their prevention

Worker conditions will vary according to geographical locale. Seasonal workers are especially vulnerable to living in substandard conditions. Health risks will vary in relation to the environmental factors, working conditions, living conditions and the socioeconomic class of the worker.

Due to the high temperatures in the areas where cane is produced, workers need to consume large quantities of liquid.

Fumes and gases such as carbon dioxide, sulphur dioxide, carbon monoxide and hydrochloric acid may be given off at various stages of the refining process. The high temperatures of processing can also result in fumes and steam that are not only irritating or hot, but sometimes can be toxic as well.

In some areas of the mill, there are excessive noise levels.

Bagassosis is an occupational lung disease of the extrinsic allergic alveolitis type, caused by breathing dusts containing spores of thermophilic actinomycetes which grow in stored, mouldy bagasse. Hypersensitivity pneumonitis can also result from this exposure.

In developing countries, workers may be unskilled, with no safety training. Also there may be a high turnover rate for employees, which can lead to problems in keeping up with training and increasing skill levels. Although statistical data do not show a high incidence of occupational disease, this can be due in part to reporting and calculating problems, such as the fact that the mills and refining plants are not open year-round, but only for 5 to 6 months of the year. Thus annual accident rates may appear low. During the remainder of the year, seasonal workers will be employed in entirely different jobs, while permanent employees will be maintaining and working with the machinery, equipment and facilities.

Occupational accidents, such as falls, strains, sprains and so on, differ little from those in other industrial and agricultural activities. With increasing mechanization, the occupational accidents are fewer but are often more serious. The more frequent injuries include diseases related to heat stroke or heat stress, dermatitis, conjunctivitis, burns and falls.

In order to plan and put into effect a health and safety programme for a specific sugar mill, it is necessary to conduct a qualitative and quantitative assessment of the risks and hazards involved, including identification of corrective measures, such as the use of local exhaust systems for dust, gas and fumes where appropriate. Dust control can be used effectively for controlling bagasse dust. The facility should be properly aired and ventilated to reduce excessive heat, and adequate lighting should be provided. Machinery should be properly guarded, and proper protective clothing should be provided and easily accessible to workers. Health and safety standards and regulations must be complied with. A proper safety programme, for which trained staff are responsible, to ensure the safety of the workers should be in place.

Noise is a widespread hazard. Noisy machines should be soundproofed, and, in areas where the noise level cannot be reduced adequately, hearing protection must be provided and a hearing conservation programme instituted. That programme should include audiometric testing and worker training.

 

Back

Thursday, 10 March 2011 15:19

Potato Harvesting

Roots and tubers are a major part of the diet, food energy and nutrient source for more than 1 billion people in the developing world. Root crops are used to produce food products including composite flours, noodles, chips and dehydrated products. They provide about 40% of the diet for half of the sub-Saharan African population. Cassava has become one of the developing world’s most important staples, providing a basic diet to about 500 million people. Cassava has also become an important export crop for animal feed in Europe.

Roots and tubers—potatoes, sweet potatoes, cassava, yams and taro—are known as the starchy foods. They are high in carbohydrates, calcium and vitamin C, but low in protein. These foods are the subsistence crops in some of the poorest countries. Several root food crops are staples in major world regions. These include the yam in Indochina, Indonesia and Africa; the potato in South America, Central America, Mexico and Europe; and the cassava and sweet potato in South America (Alexandratos 1995).

The potato was introduced into Ireland in the 1580s, and a small plot could feed a six-child family, a cow and a pig. Moreover, the crop could remain in the soil protected from the winter freezes and fires. The potato became the food of the poor in Ireland, England, France, Germany, Poland and Russia. In 1845, a blight struck the potato across Europe, which resulted in the great, fatal potato famine in Ireland, where substitute crops were unavailable (Tannahill 1973).

The potato is still a principal crop in the developed world. Its production continues to increase in the United States, and much of this increase is attributed to processed potatoes. Growth in processed potatoes is occurring in chips and shoestrings, frozen French fries, other frozen products and canned potatoes. The principal occupational hazards are related to injury and are experienced during the mechanical harvesting operation. In a Canadian study, potato farmers were found to be at elevated risk of pancreatic cancer, but no association was made with an exposure.

Hazards

Each moving part of the potato harvester carries the potential for injury. The tractor’s PTO shaft, which connects the tractor and the harvester by universal joints or yokes, is the source of kinetic energy and of injuries. The PTO shaft should be shielded. The most common injury on a PTO shaft occurs when the yoke catches a loose piece of clothing, entangling the wearer.

All hydraulic systems operate under pressure, even as much as 2,000 pounds per square inch (14,000 Kpa), which is three times the pressure needed to penetrate skin. Thus a worker should never cover a leaking hydraulic hose with a finger since the fluid could be injected through the skin. If any fluid is injected into the skin, it must be surgically removed within a few hours or gangrene may develop. If any point in the hydraulic system fails, a serious injury can occur. A ruptured hydraulic hose can spray fluid a great distance. Hydraulic systems store energy. Careless servicing or adjusting can lead to injury.

A pinch-type injury can occur where two machinery parts move together and at least one of them moves in a circle. Gear and belt drives are examples of pinch points. Clothing or body parts can catch and become drawn into the gears. Proper guarding of potato harvester parts reduces the chance of a pinch-type injury.

A wrap-type injury can occur when an exposed, unshielded rotating component, such as a PTO shaft, entangles a loose piece of clothing: a sleeve, a shirt-tail, a frayed piece of clothing or even long hair. Smooth PTO shafts with rust or nicks can be rough enough to catch clothing; a slowly rotating PTO shaft must still be regarded with caution. However, the rounder, smoother shafts are less likely to catch clothing than square shafts. The universals at the end of the PTO shafts are the most likely to catch loose clothing and cause a wrap-type injury. These bulky parts extend beyond the PTO shaft and can cause a wrap-type injury even if one is clear of the PTO shaft. PTO shafts from the tractor to the potato harvester must be guarded. No one should work amid unsafe conditions such as unshielded PTO shafts.

Shear points are areas where two pieces move in a cutting motion. A finger placed in a boom joint or between a fan belt and the pulley would be quickly severed. The belt, turned by the engine that drives the fan, is a site for amputation as well as other bodily injuries. Again, proper shielding of potato harvester parts reduces the chance of a shear injury.

Crush points are found where two objects move towards each other, or an object moves toward a stationary object. Big trucks are involved in a potato harvest. Movement in the field and especially in a closed facility such as a potato storage building can lead to runovers and crushed feet or legs.

A pull-in injury occurs when a worker is pulled into machinery. Pull-in injuries can occur any time there is an attempt to remove something from a potato harvester while it is operating, even if it is not moving forward.

Thrown-object injuries occur when projectiles are hurled. Air-assisted potato harvesters routinely throw soil and small rocks in the process of separating potato tubers from rocks. The soil and debris are thrown with enough force to cause eye injuries.

Prevention

Fortunately, there is a great deal that can be done to avoid injuries. Clothing can make the difference between being caught in a pinch or wrap point and being safe. Loose, long hair can catch in wrap and pinch points and drag the worker’s head into a dangerous spot. Long hair should be securely tied. Skid-resistant shoes help keep the worker from slipping while standing on the sorting platform, which may be treacherous with mud and vines. Gloves, if worn while working on the sorting table, should be tight fitting and not have frayed edges or floppy cuffs.

Attitude, alertness and avoiding dangerous situations complement safe attire. No one should ever mount or dismount a potato harvester while it is in motion. The rider must wait until the harvester stops. Many of the serious and debilitating injuries occur from falling and being crushed while attempting to mount or dismount a moving harvester. One should try to be in a stable position before the tractor starts to pull the potato harvester. This will reduce the possibility of falling down as the tractor jerks forward. No one should ever be between the tractor and the harvester while they are in motion or when they are started. The tractor operator or the workers riding the potato harvester should never be close enough to touch the PTO shaft while it is running or when it is started. Harvesters should not be lubricated, adjusted or repaired while running. No attempt to dislodge anything from the belts should be made while they are in motion.

 

Back

Thursday, 10 March 2011 15:20

Vegetables and Melons

A wide variety of vegetables (herbaceous plants) is grown for edible leaves, stems, roots, fruits and seeds. Crops include leafy salad crops (e.g., lettuce and spinach), root crops (e.g., beets, carrots, turnips), cole crops (cabbage, broccoli, cauliflower) and many others grown for their fruit or seed (e.g., peas, beans, squashes, melons, tomatoes).

Since the 1940s, the nature of vegetable farming, particularly in North America and Europe, has changed dramatically. Previously, most fresh vegetables were grown close to population centres by garden or truck farmers and were available only during or shortly after harvest. The growth of supermarkets and the development of large food-processing companies created a demand for steady, year-round supplies of vegetables. At the same time, large-scale vegetable production on commercial farms became possible in areas far from major population centres because of rapidly expanding irrigation systems, improved insect sprays and weed control, and the development of sophisticated machinery for planting, spraying, harvesting and grading. Today, the main source of fresh vegetables in the United States is long-season areas, such as the states of California, Florida, Texas and Arizona, and Mexico. Southern Europe and North Africa are major vegetable sources for northern Europe. Many vegetables are also grown in greenhouses. Farmers’ markets selling local produce, however, remain the major outlet for vegetable growers throughout much of the world, particularly in Asia, Africa and South America.

Vegetable farming requires substantial skills and care to ensure production of high-quality vegetables that will sell. Vegetable farming operations include soil preparation, planting and growing crops, harvesting, processing and transportation. Weed and pest control and water management are crucial.

Vegetable and melon workers are exposed to many occupational hazards in their working environment, which include plants and their products, agrochemicals for controlling pests and oils and detergents for maintaining and repairing machinery. Manual or automatic work also forces the workers into uncomfortable positions (see figure 1). Musculoskeletal disorders such as low-back pain are important health problems in these workers. Agricultural tools and machines used with vegetables and melons give rise to high risks for traumatic injuries and various health impairments similar to those seen in other agricultural work. In addition, outdoor growers are exposed to solar radiation and heat, whereas exposure to pollens, endotoxins and fungi should be taken into account among greenhouse farmers. Therefore, a wide variety of work-related disorders can be found in those populations.

Figure 1. Manual labour on a vegetable farm near Assam, Jordan

AGR200F1

Food allergies to vegetables and melons are well known. They are mostly provoked by vegetable allergens and can cause an immediate reaction. Clinically, mucocutaneous and respiratory symptoms appear in most patients. Occupational allergy among vegetable workers differs from food allergy in several ways. Occupational allergens are diverse, including those of vegetable origin, chemicals and biological derivatives. Artichoke, brussels sprouts, cabbage, carrot, celery, chicory, chive, endive, garlic, horseradish, leek, lettuce, okra, onion, parsley and parsnip have been reported to contain vegetable allergens and to sensitize vegetable workers. Occupational allergies to melon allergens, however, are seldom reported. Only a few allergens from vegetables and melons have been isolated and identified because of the difficulty and complexity of the laboratory techniques required. Most allergens, especially those of vegetable origin, are fat soluble, but a few are water soluble. The ability to sensitize also varies depending on botanical factors: The allergens may be sequestered in resin canals and released only when the vegetables are bruised. However, in other cases they may be readily released by fragile grandular hairs, or be                                                                                                                           excreted onto the leaf, coat the pollens or be widely                                                                                                                                             disseminated by the action of wind on trichomes (hair-like                                                                                                                                 growths on the plants).

Clinically, the most common occupational allergic diseases reported in the vegetable workers are allergic dermatitis, asthma and rhinitis. Extrinsic allergic alveolitis, allergic photodermatitis and allergic urticaria (hives) can be seen in some cases. It should be emphasized that vegetables, melons, fruits and pollens have some allergens in common or cross-reacting allergens. This implies that atopic persons and individuals with an allergy to one of those may become more susceptible than others in the development of occupational allergies. To screen and diagnose these occupational allergies, a number of immune tests are currently available. In general, the prick test, intradermal test, measurement of allergen-specific IgE antibody and in vivo allergen challenge test are used for immediate allergies, whereas the patch test can be chosen for delayed-type allergy. The allergen-specific lymphocyte proliferation test and cytokine production are helpful in diagnosing both types of allergy. These tests can be performed using native vegetables, their extracts and released chemicals.

Dermatoses such as pachylosis, hyperkeratosis, nail injury chromatosis and dermatitis are observed in vegetable workers. In particular, contact dermatitis, both irritant and allergic, occurs more frequently. Irritant dermatitis is caused by chemical and/or physical factors. Vegetable parts such as thrichomes, spicules, coarse hairs, raphides and spines are responsible for most of this irritation. On the other hand, allergic dermatitis is classified into immediate and delayed types on the basis of their immunopathogenesis. The former is mediated through humoural immune responses, whereas the later is mediated through cellular immune responses.

Clinically, many patients with allergic dermatitis experience a range of symptoms including itching, erythema, rash, swelling and vesicles. The sites of lesions are mainly the hands, arms, face and neck. In a field survey of Japanese okra growers (Nomura 1993), more than 50% of farmers had skin lesions, and these appeared mostly on the hands and arms. About 20 to 30% of farmers showed a positive patch test reaction to okra pad or leaf extracts. Furthermore, proteolytic activity of okra extracts was shown to cause the skin lesions.

Agricultural chemicals are also important allergens responsible for allergic dermatitis. These include insecticides (DDVP, diazinon, EPN, malathion, naled, parathion and so on), fungicides (benomyl, captafol, captan, maneb, manzeb, nitrofen, plondrel®, thiram, zineb, ziram and so on), herbicides (carbyne, randox and so on) and fumigants (D-D® mixture of 1,3-dichloropropene and 1,1,2-dichloropropane and related compounds). Additionally, opportunistic bacteria and Streptococcus pyogenes are found to play an important role in allergic dermatitis and urticaria for vegetable workers.

Vegetable workers, especially those working in greenhouses or indoors, are exposed to many vegetable products and to compounds such as pesticides, which are responsible for increased lung diseases. In a national study conducted among Swiss farmers, it was documented that the age-standardized proportional mortality for all lung diseases, bronchitis and asthma, and asthma alone were 127, 140 and 137, respectively. Vegetable products can directly cause occupational allergic asthma, or provide non-specific irritants and/or the vehicle for other allergens including pollens, spores, mites and other substances. Vegetable products which can cause allergic asthma are bromelin, castor beans and wax, freesia, grain pollen, guar gum, papain, paprika, hops, ipecacuanha, plicatic acid, quillaic acid, saponin and sunflower pollen.

Fungi in the work environment produce many spores, some of which cause allergic asthma and/or extrinsic allergic alveolitis. However, it is rare that allergic asthma and extrinsic allergic alveolitis from those allergens occur in the same subjects. As for the causative micro-organisms, Alternaria, Aspergillus niger, Cladosporium, humidifier sludge, Merulius lacrymans, Micropolyspora faei, Paecilomyces and Verticillium have been identified. In most cases, antigens of fungal origin are present in spores and breakdown products.

Patients with occupational asthma caused by vegetable products always show elevated serum IgE antibody, eosinophilia and a positive prick test, whereas specific precipitating antibody, positive prick test and distinct radiological findings are seen in patients with extrinsic allergic alveolitis. In addition to pulmonary allergy to vegetable products and fungi spores, nasal symptoms are provoked in atopic patients when handling vegetables such as carrots and lettuce. Gastrointestinal complaints are not generally found.

Agrochemicals are applied for various purposes both in indoor and outdoor vegetable growing. Among the chemicals used, some have been found to have asthmatic potential. They include captafol, chlorothalonil, creosote, formaldehyde, pyrethrin and streptomycin. The improper uses of pesticides potentially can result in soil and vegetable contamination. The application of pesticides without suitable personal protective equipment can lead to both acute or chronic toxic effects.

 

Back

Thursday, 10 March 2011 15:23

Berries and Grapes

This article covers the injury and illness prevention methods against hazards commonly encountered in production of grapes (for fresh consumption, wine, juice or raisins) and berries, including brambles (i.e., raspberries), strawberries and bush berries (i.e., blueberries and cranberries).

Grapevines are stems that climb on supporting structures. Vines planted in commercial vineyards are usually started in spring from year-old rooted or grafted cuttings. They are typically planted 2 to 3.5 m apart. Each year, the vines must be dug over, fertilized, subdivided and pruned. The style of pruning varies in different parts of the world. In the system prevalent in the United States, all the shoots except the strongest ones on the vine are later pruned; the remaining shoots are cut back to 2 or 3 buds. The resulting plant develops a strong main stem which can stand alone, before it is allowed to bear fruit. During the expansion of the main stem, the vine is loosely tied to an upright support 1.8 m tall or higher. After the fruit-producing stage is reached, the vines are carefully pruned to control the number of buds.

Strawberries are planted in early spring, midsummer or later, depending on the latitude. The plants bear fruit in the spring of the following year. A variety called everbearing strawberries produces a second, smaller crop of fruit in the fall. Most strawberries are propagated naturally by means of runners that form about two months after the planting season. The fruit is found at ground level. Brambles such as raspberries are typically shrubs with prickly stems (canes) and edible fruits. The underground parts of brambles are perennial and the canes biennial; only second-year canes bear flowers and fruits. Brambles grow fruit at heights of 2 m or less. Like grapevines, berries require frequent pruning.

Growing practices differ for each fruit species, depending on the type of soil, climate and fertilizer it needs. Close control of insects and diseases is essential, often requiring frequent application of pesticides. Some modern growers have shifted toward biological controls and careful monitoring of pest populations, spraying chemicals only at the most effective times. Most grapes and berries are harvested by hand.

In a study of non-fatal injuries for the 10-year period 1981 through 1990 in California, the most common injury within this category of farms was sprains and strains, accounting for 42% of all injuries reported. Lacerations, fractures and contusions accounted for another 37% of injuries. The most common causes of injuries were being struck by an object (27%), overexertion (23%) and falls (19%) (AgSafe 1992). In a 1991 survey, Steinke (1991) found that 65% of injuries on farms identified as producing this category of crops in California were strains, sprains, lacerations, fractures and contusions. Parts of the body injured were fingers (17%), the back (15%), eyes (14%) and the hand or wrist (11%). Villarejo (1995) reported that there were 6,000 injury claims awarded per 100,000 full-time equivalents to workers in strawberry production in California in 1989. He also noted that most workers do not find employment throughout the year, so that the percentage of workers who suffer injuries could be several times higher than the 6% figure reported.

Musculoskeletal Problems

The major hazard associated with musculoskeletal injuries in these crops is rate of work. If the owner is working in the fields, she or he is typically working quickly to finish one task and move on to the next task. Hired labour is often paid by piece-rate, the practice of paying for work solely based upon what is accomplished (i.e., kilograms of berries harvested or number of grapevines pruned). This type of payment is often at odds with the extra time required to make sure fingers are out of the clipper before squeezing, or carefully walking to and from the edge of the field when exchanging filled baskets for empty ones during harvest. A high rate of work performance can lead to using poor postures, taking undue risks, and not following good safety practices and procedures.

Hand pruning of berries or vines requires the frequent squeezing of the hand to engage a clipper, or the frequent use of a knife. Hazards from the knife are obvious, as there is no solid surface against which to place the vine, shoot or stalk and frequent cuts to the fingers, hands, arms, legs and feet are likely to result. Pruning with a knife should be done only as a last resort.

Although a clipper is the preferred tool for pruning, either in the dormant season or while foliage is on the plants or vines, its use does have hazards. The major safety hazard is the threat of cuts from contact with the open blade while placing a vine or stalk in the jaws, or from inadvertent cutting of a finger while also cutting a vine or stalk. Sturdy leather or cloth gloves are good protection against both hazards and can also provide protection against contact dermatitis, allergies, insects, bees and cuts from a trellis.

The frequency and effort required for cutting determines the likelihood of development of cumulative-trauma injuries. Although injury reports do not currently show widespread injury, this is believed to be due to the frequent job rotation found on farms. The force required to operate a common clipper is in excess of recommended values, and the frequency of effort indicates the potential for cumulative-trauma disorders, according to accepted guidelines (Miles 1996).

To minimize likelihood of injury, clippers should be kept well lubricated and blades should be sharpened frequently. When large vines are encountered, as they are frequently in grapes, the size of the clipper should be increased accordingly, so as not to overload the wrist or the clipper itself. Lopping shears or pruning saws are often required for safe cutting of large vines or plants.

Lifting and carrying of loads is typically associated with harvesting of these crops. The berries or fruit are usually hand harvested and carried in some type of basket or carrier to the edge of the field, where they are deposited. Loads are often not heavy (10 kg or less), but the distance to be travelled is significant in many cases and over uneven terrain, which may also be wet or slippery. Workers should not run on the uneven terrain and should maintain solid footing at all times.

Harvesting of these crops is often done in awkward postures and at a rapid pace. Persons typically twist and bend, bend to the ground without bending the knees and move quickly between the bush or vine and the container. Containers are sometimes placed upon the ground and pushed or pulled along with the worker. Fruit and berries can be found anywhere from ground level to 2 m in height, depending upon the crop. Brambles are typically found at heights of 1 m or less, leading to almost continuous bending of the back during harvest. Strawberries are at ground level, but workers remain on their feet and bend down to harvest.

Grapes are also commonly cut to free them from the vine during hand harvest. This cutting motion is also very frequent (hundreds of times per hour) and requires sufficient force to cause concern regarding cumulative-trauma injuries if the harvest season were to last more then a few weeks.

Working with trellises or arbours is often involved in production of vines and berries. Installing or repairing arbours frequently involves doing work at heights above one’s head and stretching while exerting a force. Sustained effort of this type can lead to cumulative injuries. Each instance is an exposure to strain and sprain injury, particularly to the shoulders and arms, resulting from exerting significant force while working in an awkward posture. Training plants on trellises requires the exertion of substantial force, a force that is increased by the weight of the vines, foliage and fruit. This force is commonly exerted through the arms, shoulders and back, all of which are susceptible to both acute and long-term injury from such overexertion.

Pesticides and Fertilizers

Grapes and berries are subject to frequent pesticide applications for control of insects and disease pathogens. Applicators, mixers, loaders and anyone else in the field or assisting with the application should follow the precautions listed on the pesticide label or as required by local regulations. Applications in these crops can be particularly hazardous because of the nature of the deposit required for pest control. Frequently, all portions of the plant must be covered, including the undersides of the leaves and all surfaces of the fruit or berries. This often implies use of very small droplets and the use of air to promote canopy penetration and deposit of the pesticide. Thus many aerosols are produced, which can be hazardous through inhalation, ocular and dermal exposure routes.

Fungicides are frequently applied as dusts to grapes and many types of berries. The most common of these dusts is sulphur, which may be used in organic farming. Sulphur can be irritating to the applicator and to others in the field. It has also been known to reach air concentrations sufficient to cause explosions and fires. Care should be taken to avoid travelling through a cloud of sulphur dust with any possible ignition source, such as an engine, electric motor or other spark-producing device.

Many fields are fumigated with highly toxic materials before these crops are planted in order to reduce the population of such pests as nematodes, bacteria, fungi and viruses before they can attack the young plants. Fumigation usually involves injection of a gas or liquid into the soil and covering with a plastic sheet to prevent the pesticide from escaping too soon. Fumigation is a specialized practice and should be attempted only by those properly trained. Fumigated fields should be posted with warnings and should not be entered until the cover has been removed and the fumigant has dissipated.

Fertilizers may generate hazards during their application. Inhalation of dust, skin contact dermatitis and irritation of the lungs, throat and breathing passages may occur. A dust mask may be useful in reducing exposure to non-irritating levels.

Workers may be required to enter fields for culturing operations such as irrigation, pruning or harvest soon after pesticides have been applied. If this is sooner than the re-entry interval specified by the pesticide label or local regulations, protective clothing must be worn to protect against exposure. The minimum protection should be a long-sleeved shirt, long-legged pants, gloves, head covering, foot coverings and eye protection. More stringent protection, including a respirator, impermeable clothing and rubber boots may be required based upon the pesticide used, time since the application and regulations. Local pesticide authorities should be consulted to determine the proper level of protection.

Machine Exposures

The use of machinery in these crops is common for soil preparation, planting, weed cultivation and harvest. Many of these crops are grown on hillsides and uneven fields, increasing the chance for tractor and equipment rollovers. General safety rules of tractor and equipment operation to avoid rollovers should be followed, as should the policy of no riders on equipment unless additional personnel must be present for proper equipment operation and a platform is provided for their safety. More information on proper use of equipment can be found in the article “Mechanization” in this chapter and elsewhere in this Encyclopaedia.

Many of these crops are also grown in uneven fields, such as on beds or ridges or in furrows. These features increase the danger when they become muddy, slippery or concealed by weeds or the plant canopy. Falling in front of equipment is a hazard, as is falling and straining or spraining a body part. Extra precautions should be taken particularly when fields are wet or at harvest, when discarded fruit may be underfoot.

Mechanical pruning of grapes is increasing around the world. Mechanical pruning typically involves rotating knives or fingers to gather vines and draw them past stationary knives. This equipment can be hazardous to anyone in the vicinity of the entry point for the cutters and should be used only by a properly trained operator.

Harvest operations typically use several machines at once, requiring coordination and cooperation of all equipment operators. Harvesting operations also, by their very nature, include crop gathering and removal, which frequently requires the use of vibrating rods or paddles, stripping fingers, fans, cutting or slicing operations and rakes, any of which are capable of causing great physical harm to persons who become entangled in them. Care should be taken to not place any person near the intake of such machines while they are running. Machine guards should always be kept in place and maintained. If guards must be removed for lubrication, adjustment or cleaning, they should be replaced before the machine is started again. Guards on an operating machine should never be opened or removed.

Other Hazards

Infections

One of the most common injuries suffered by workers in grapes and berries is a cut or puncture, either from thorns on the plant, tools or the trellis or support structure. Such open wounds are always subject to infection from the many bacteria, viruses or infectious agents present in fields. Such infections can cause serious complications, even loss of limb or life. All field workers should be protected with an up-to-date tetanus immunization. Cuts should be washed and cleaned, and antibacterial agent applied; any infections that develop should be treated by a physician immediately.

Insect bites and bee stings

Field workers tending and harvesting are at an increased risk of insect bites and bee stings. Placing hands and fingers into the plant canopy to select and grasp ripe fruit or berries increases the exposure to bees and insects that may be foraging or resting in the canopy. Some insects may be feeding on the ripe berries also, as could rodents and other vermin. The best protection is to wear long sleeves and gloves whenever working in the foliage.

Solar radiation

Heat stress

Exposure to excessive solar radiation and heat can easily lead to heat exhaustion, heat stroke or even death. Heat added to the human body through solar radiation, the effort of work and heat transfer from the environment must be removed from the body through sweat or sensible heat loss. When ambient temperatures are above 37 °C (i.e., normal body temperature), there can be no sensible heat loss, so the body must rely solely on perspiration for cooling.

Perspiration requires water. Anyone working in the sun or in a hot climate should drink plenty of fluids over the entire day. Water or sports drinks should be used, even before one feels thirsty. Alcohol and caffeine should be avoided, as they tend to act as diuretics and actually speed water loss and interfere with the body’s heat-regulating process. It is often recommended that persons drink 1 litre per hour of work in the sun or in hot climates. A sign of drinking insufficient fluids is the lack of the need to urinate.

Heat-related diseases can be life-threatening and require immediate attention. Persons suffering from heat exhaustion should be made to lie down in the shade and drink plenty of fluids. Anyone suffering from heat stroke is in grave danger and needs immediate attention. Medical assistance should be summoned immediately. If assistance is not available within a matter of minutes, one should attempt to cool the victim by immersing him or her in cool water. If the victim is unconscious, continued breathing should be assured through first aid. Do not give fluids by mouth.

Signs of heat-related diseases include excessive sweating, weakness in the limbs, disorientation, headaches, dizziness and, in extreme cases, loss of consciousness and also loss of the ability to sweat. The latter symptoms are immediately life-threatening, and action is required.

Working in vineyards and bush berry fields may increase the risk of heat-related illnesses. Air circulation is reduced between the rows, and there is the illusion of working partially in the shade. High relative humidity and cloud covers can also give one a false impression of the effects of the sun. It is necessary to drink plenty of fluids whenever working in fields.

Skin diseases

Long-term exposure to the sun can lead to premature ageing of the skin and increased likelihood of skin cancers. Persons exposed to the direct rays of the sun should wear clothing or sun-screen products to provide protection. At lower latitudes, even a few minutes of exposure to the sun can result in a severe sunburn, especially in those with fair complexions.

Skin cancers can begin on any part of the body, and suspected cancers should immediately be checked by a physician. Some of the frequent signs of skin cancers or pre-cancerous lesions are changes in a mole or birthmark, an irregular border, bleeding or a change in colour, often to a brown or gray tone. Those with a history of sun exposure should undergo annual skin cancer screenings.

Contact dermatitis and other allergies

Frequent and prolonged contact with plant excretions or plant pieces can result in sensitization and cases of contact allergies and dermatitis. Prevention through wearing long-sleeved shirts, long-legged pants and gloves whenever possible is the preferred course of action. Some creams can be used to provide a barrier to the transfer of irritants to the skin. If the skin cannot be protected from exposure to plants, washing immediately after the plant contact ends will minimize the effects. Cases of dermatitis with skin eruptions or which do not heal should be seen by a physician.

 

Back

Thursday, 10 March 2011 15:25

Orchard Crops

Generally, farms where fruit trees grow in the temperate zones are called orchards; tropical trees are typically grown in plantation or village groves. Naturally occurring fruit trees have been bred and selected over the centuries to produce a diversity of cultivars. Temperate orchard crops include the apple, pear, peach, nectarine, plum, apricot, cherry, persimmon and prune. Nut crops grown in either temperate or semitropical climates include the pecan, almond, walnut, filbert, hazelnut, chestnut and pistachio. Semitropical orchard crops include the orange, grapefruit, tangerine, lime, lemon, figs, kiwis, tangelo, kumquat, calamondin (Panama orange), citron, Javanese pomelo and date.

Orchard Systems

The growing of fruit trees involves several processes. Orchardists may choose to propagate their own stock either by planting seed or asexually through one or more cutting, budding, grafting or tissue culture techniques. Orchardists plow or disk the soil for planting the tree stock, dig holes in the soil, plant the tree and add water and fertilizer.

Growing the tree requires fertilizing, weed control, irrigation and protecting the tree from spring frost. Fertilizer is applied aggressively during the early years of a tree’s growth. Components of fertilizers mixtures used include ammonium nitrate and suphate, elemental fertilizer (nitrogen, phosphorus and potassium), cottonseed meal, blood meal, fish meal, sterilized sewage sludge and urea formaldehyde (slow release). Weeds are controlled by mulching, tilling, mowing, hoeing and applying herbicides. Insecticides and fungicides are applied with sprayers, which are tractor-drawn in the larger operations. Several pests can damage the bark or eat the fruit, including squirrels, rabbits, raccoons, opossums, mice, rats and deer. Controls include netting, live traps, electric fences and guns, as well as visual or odorous deterrents.

Spring freezes can destroy flower blooms in hours. Overhead sprinklers are used to maintain a water-ice mixture so that the temperature does not drop below freezing. Special frost-guard chemicals may be applied with the water to control ice-nucleating bacteria, which can attack damaged tree tissue. Heaters also may be used in the orchard to prevent freezing, and they may be oil-fired in open areas or electric incandescent bulbs under a plastic film supported by plastic pipe frames.

Pruning tools can transmit disease, so they are soaked in a water-chlorine bleach solution or rubbing alcohol after pruning each tree. All limbs and trimmings are removed, shredded and composted. Limbs are trained, which requires the positioning of scaffolds between limbs, building trellises, pounding vertical stakes into the soil and tying limbs to these devises.

The honey-bee is the principal pollinator of fruit trees. Partial girdling—knife cuts into the bark on each side of the trunk—of the peach and pear tree can stimulate production. To avoid excess stunting, limb breakage and irregular bearing, orchardists thin the fruit either by hand or chemically. The insecticide carbaryl (Sevin), a photo inhibitor, is used for chemical thinning.

Manual fruit picking requires climbing ladders, reaching for the fruit or nuts, placing the fruit into containers and carrying the filled container down the ladder and to a collection area. Pecans are knocked from the trees with long poles and gathered manually or by a special machine that envelopes and shakes the tree trunk and catches and automatically funnels the pecans into a container. Trucks and trailers are commonly used in the field during harvest and for transport on public roads.

Tree Crop Hazards

Orchardists use a variety of agricultural chemicals, including fertilizers, herbicides, insecticides and fungicides. Pesticide exposures occur during application, from residues during various tasks, from pesticide drift, during mixing and loading and during harvesting. Employees may also be exposed to noise, diesel exhaust, solvents, fuels and oils. Malignant melanoma is elevated for orchardists as well, especially to the trunk, scalp and arms, presumably from sunlight (ultraviolet exposure). Handling some types of fruit, especially citrus, may cause allergies or other skin problems.

Rotary mowers are popular machines for cutting weeds. These mowers are attached to and powered by tractors. Riders on tractors can fall off and be seriously injured or killed by the mower, and debris can be thrown hundreds of metres and cause injury.

The construction of fences, trellises and vertical stakes in orchards may require the use of tractor-mounted post hole diggers or post drivers. Post hole diggers are tractor-powered augers that drill holes 15 to 30 cm in diameter. Post drivers are tractor-power impact drivers for pounding posts into the soil. Both of these machines are dangerous if not operated properly.

Dry fertilizer can cause skin burns and irritation of the mouth, nose and eyes. The spinning mechanism at the rear of a centrifugal broadcast spreader is also a source of injury. Spreaders are also cleaned with diesel fuel, which presents a fire hazard.

Fatalities among orchard workers may occur from motor vehicle crashes, tractor rollovers, farm machinery incidents and electrocutions from moving irrigation pipe or ladders that come into contact with overhead power lines. For orchard work, rollover protective structures (ROPs) are commonly removed from tractors because of their interference with tree limbs.

Manual handling of fruit and nuts in the picking and carrying operations places orchardists at
risk of sprain and strain injury. In addition, hand tools such as knives and shears are hazards for cuts in orchard work. Orchardists are also exposed to falling objects from the trees during harvesting and injury from falls from ladders.

Hazard Control

In the use of pesticides, the pest must be identified first so that the most effective control method and timing of control can be used. Safety procedures on the label should be followed, including the use of personal protective equipment. Heat stress is a hazard when wearing protective gear, so frequent rest breaks and plenty of drinking water are needed. Attention needs to be given to allowing enough reentry time to prevent hazardous exposures from pesticide residue, and pesticide drift from applications elsewhere in the orchard needs to be avoided. Good sanitary facilities are needed, and gloves may be useful to avoid skin disorders. In addition, table 1 shows several safety precautions in operating rotary mowers, post hole diggers, post drivers and fertilizer spreading.


Table 1. Safety precautions for rotary mowers, post hole diggers and post drivers

Rotary mowers (cutters)

  • Avoid cutting over tree stumps, metal, and rocks, which can become projectiles thrown
    from the mower.
  • Keep people out of the work area to avoid being struck by flying objects.
  • Maintain the chain guards around the mower to prevent projectiles from being
  • thrown from the mower.
  • Do not allow riders on the tractor to avoid a fall under the mower.
  • Keep PTO shields in place.
  • Disengage the PTO before starting the tractor.
  • Use care when turning sharp corners and pulling drawn mowers so as not to
    catch the mower on the tractor wheel, which can result in the mower being
    thrown towards the operator.
  • Use front wheel weights when attached to a mower by the three-point hitch so
    as to keep the front wheels on the round to maintain steering control.
  • Use wide-set tires if possible to add to tractor stability.
  • Lower the mower to the ground before leaving it unattended.

Post hole diggers (tractor mounted augers)

  • Shift the transmission into park or neutral before operation.
  • Set tractor brakes before digging.
  • Run the digger slowly to maintain control.
  • Dig the hole in small steps.
  • Never wear loose hair, clothing, or drawstrings when digging.
  • Keep everyone clear of the auger and power shafts when digging.
  • Stop the auger and lower it to the ground when not digging.
  • Do not engage the power when unlodging an auger. Remove lodged augers
    manually by turning it counter clockwise and then hydraulically lift the auger with the tractor.

 

Post drivers (tractor mounted, impact driver)

  • Shut off the tractor engine and lower the hammer before lubrication or adjustment.
  • Never place hands between the top of the post and the hammer.
  • Do not exceed the recommended hammer stroke per minute.
  • Use a guide to hold the post during driving in case the post breaks.
  • Keep hands clear of posts that are about to be driven.
  • Put all shields in place before operation.
  • Wear safety glasses and hearing protection during operation.

 

Fertilizer spreading (mechanical)

  • Stay clear of the rear of fertilizer spreaders.
  • Do not unplug a spreader while it is operating.
  • Work in well-ventilated areas away from fire ignition sources when cleaning
    the spreaders with diesel fuel.
  • Keep the dust off of skin, wear long sleeved shirts, and button collar when
    handling dry fertilizer. Wash several times a day.
  • Work with the wind blowing away from work.
  • Tractor operators should drive crosswind to the spreader to avoid dust blowing onto them.


Where ROPs interfere with orchard work, foldable or telescoping ROPs should be installed. The operator should not be belted into the seat when operating without a deployed ROPs. As soon as overhead clearance permits, the ROPs should be deployed and the seat belt fastened.

To prevent falls, use of the top step of the ladder should be prohibited, the ladder rungs should have anti-slip surfaces and workers should be trained and oriented on proper ladder use at the beginning of their employment. Non-conductive ladders or ladders with insulators designed into them should be used to avoid possible electrical shock if they contact a power line.

 

Back

Thursday, 10 March 2011 15:26

Tropical Tree and Palm Crops

Some text was revised from the articles “Date palms”, by D. Abed; “Raffia” and “Sisal”, by E. Arreguin Velez; “Copra”, by A.P. Bulengo; “Kapok”, by U. Egtasaeng; “Coconut cultivation”, by L.V.R. Fernando; “Bananas”, by Y. Ko; “Coir”, by P.V.C. Pinnagoda; and “Oil palms”, by G.O. Sofoluwe from the 3rd edition of this “Encyclopaedia”.

Although archaeological evidence is inconclusive, tropical forest trees transplanted to the village may have been the first domesticated agricultural crops. More than 200 fruit tree species have been identified in the humid tropics. Several of these trees and palms, such as the banana and coconut, are cultivated in smallholdings, cooperatives or plantations. While the date palm is completely domesticated, other species, such as the Brazil nut, are still harvested in the wild. More than 150 varieties of bananas and 2,500 palm species exist around the world, and they provide a broad range of products for human use. Sago palm wood feeds millions of people around the world. The coconut palm is used in more than 1,000 ways and the palmyra palm in more than 800 ways. About 400,000 people depend on the coconut for their entire livelihood. Several trees, fruits and palms of the tropical and semitropical zones of the world are listed in table 1, and table 2 shows selected commercial palms or palm types and their products.

Table 1. Commercial tropical and subtropical trees, fruits and palms

Categories

Species

Tropical and semitropical fruits (excluding citrus)

Figs, banana, jelly palm, loquat, papaya, guava, mango, kiwis, date, cherimoya, white sapota, durian, breadfruit, Surinam cherry, lychee, olive, carambola, carob, chocolate, loquat, avocado, sapodilla, japoticaba, pomegranate, pineapple

Semitropical citrus fruits

Orange, grapefruit, lime, lemon, tangerine, tangelos, calamondins, kumquats, citrons

Tropical nut trees

Cashew, Brazil, almond, pine, and macadamia nuts

Oil crops

Oil palm, olive, coconut

Insect feed

Mulberry leaf (silkworm feed), decaying sago palm pith (grub feed)

Fibre crops

Kapok, sisal, hemp, coir (coconut husk), raffia palm, piassaba palm, palmyra palm, fishtail palm

Starch

Sago palm

Vanilla bean

Vanilla orchid

 

 Table 2. Palm products

Groups

Products

Uses

Coconut

Nut meat

Copra (desiccated meat)

Nut water

Nut shells

Coir (husk)

Leaves

Wood

Flower nectar inflorescence

Food, copra, animal feed

Food, oil, oilsoap, candle, cooking oil, margarine, cosmetics, detergent, pai, coconut milk, cream, jam

Fuel, charcoal, bowls, scoops, cups

Mats, string, potting soil mix, brush, rope, cordage

Thatching, weaving

Building

Palm honey

Palm sugar, alcohol, arrack (palm spirits)

Date

Fruit

Sap

Dry, sweet and fine dates

Date sugar

African oil

Fruit (palm pulp oil; similar to olive oil)

Seeds (palm kernel oil)

Cosmetics, margarine, dressing, fuel, lubricants

Soap, glycerine

Palmyra

Leaves

Petioles and leaf sheaths

Truck

Fruit and seeds

Sap, roots

Paper, shelter, weaving, fans, buckets, caps

Carpets, rope, twine, brooms, brushes

Timber, sago, cabbage

Food, fruit pulp, starch, buttons

Sugar, wine, alcohol, vinegar, sura (raw sap drink)

Food, diuretic

Sago (trunk pith of various species)

Starch

Insect feed

Meals, gruels, puddings, bread, flour

Food (grubs feeding on decayed sago pith)

Cabbage (various species)

Apical bud (upper trunk)

Salads, canned palm hearts or palmito

Raffia

Leaves

Plaiting, baskets work, tying material

Sugar (various species)

Palm sap

Palm sugar (gur, jaggery)

Wax

Leaves

Candles, lipsticks, shoe polish, car polish, floor wax

Rattan cane

Stems

Furniture

Betel nut

Fruit (nut)

Stimulant (betel chewing)

 

Processes

The agriculture of tropical tree and palm growing includes propagation, cultivation, harvesting and post-harvesting processes.

Propagation of tropical trees and palms can be sexual or asexual. Sexual techniques are needed to produce fruit; pollination is critical. The date palm is doecious, and pollen from the male palm must be dispersed upon the female flowers. Pollination is done either by hand or mechanically. The manual process involves the workers climbing the tree by gripping the truck or using tall ladders to hand pollinate the female trees by placing small male clusters in the center of each female cluster. The mechanical process uses a powerful sprayer to carry the pollen over the female clusters. In addition to use for generating products, sexual techniques are used to produce seed, which is planted and cultivated into new plants. An example of an asexual technique is cutting shoots from mature plants for replanting.

Cultivation can be manual or mechanized. Banana cultivation is typically manual, but in flat terrain, mechanization with large tractors is used. Mechanical shovels may be used to dig drainage ditches in banana fields. Fertilizer is added monthly to bananas, and pesticides are applied with boom sprayers or from the air. The plants are supported with bamboo poles against storm damage. A banana plant bears fruit after two years.

Harvesting relies largely on manual labour, though some machinery is also used. Harvesters cut the banana bunches, called hands, from the tree with a knife attached to a long pole. The bunch is dropped onto a worker’s shoulder and a second worker attaches a nylon cord to the bunch, which is then attached to an overhead cable that moves the bunch to a tractor and trailer for transport. Tapping the coconut inflorescence for the juice entails the taper walking from tree to tree on strands of rope high above the ground. Workers climb to the tree tops to pluck the nuts manually or cut the nuts with a knife attached to long bamboo poles. In the Southwest Pacific area the nuts are allowed to fall naturally; then they are gathered. The date ripens in the fall and two or three crops are gathered, requiring climbing the tree or a ladder to the date clusters. An old system of machete harvesting of fruit bunches has been replaced by the use of a hook and pole. However, the machete is still used in harvesting many crops (e.g., sisal leaves).

Post-harvest operations vary between tree and palm and by the expected product. After harvesting, banana workers—typically women and youth—wash the bananas, wrap them in polyethylene and pack them in corrugated cardboard boxes for shipping. Sisal leaves are dried, bound and transported to the factory. Kapok fruit is field dried, and the resulting brittle fruit is broken open with a hammer or pipe. Kapok fibers are then ginned in the field to remove seeds by shaking or stirring, packed in jute sacks, batted in sacks to soften the fibers and baled. After harvest, dates are hydrated and artificially ripened. They are exposed to hot air (100 to 110 °C) to glaze the skin and semi-pasteurize them and then packaged.

The dried meaty endosperm of the coconut is marketed as copra, and the prepared husk of the coconut is marketed as coir. The fibrous nut husks are stripped off by striking and levering them against spikes firmly fixed into the ground. The nut, stripped of the husk, is split in half with an axe and dried either in the sun, kilns or hot-air dryers. After drying, the meat is separated from the hard woody shell. Copra is used to produce coconut oil, oil extraction residue called copra cake or poonac and desiccated food. The coir is retted (partially rotted) by soaking in water for three to four weeks. Workers remove the retted coir from the pits in waist-deep water and send it for decortication, bleaching and processing.

Hazards and Their Prevention

Hazards in tropical fruit and palm crop production include injuries, natural exposures, pesticide exposures and respiratory and dermatitis problems. Working at high elevations is required for much work with many tropical trees and palms. The popular apple banana grows to 5 m, kapok to 15 m, coconut palms to 20 to 30 m, evergreen date palm to 30 m, and the oil palm, 12 m. Falls represent one of the most serious hazards in tropical tree cultivation, and so do falling objects. Safety harnesses and head protection should be used, and workers should be trained in their use. Using dwarf varieties of the palms may help eliminate the tree falls. Falls from the kapok tree because of branches breaking and minor hand injuries during shell cracking are also hazards.

Workers can be injured during the transport on trucks or tractor-drawn trailers. Workers climbing palms receive cuts and abrasions of the hands due to contact with sharp date palm spines and oil palm fruit as well as spiny sisal leaves. Sprains from falling in ditches and holes are a problem. Severe wounds from the machete may be inflicted. Workers, typically women, who lift packed boxes of bananas are exposed to heavy weights. Tractors should have safety cabs. Workers should be trained in the safe handling of agricultural implements, machinery guarding and safe tractor operation. Puncture-resistant gloves should be worn, and arm protection and hooks should be used in harvesting the oil palm fruit. Mechanization of weeding and cultivation reduces sprains from falls in ditches and holes. Safe and proper work practices should be used, such as proper lifting, getting help when lifting to reduce individual loads and taking breaks.

Natural hazards include snakes—a problem during forest clearing and in newly established plantations—and insects as well as diseases. Health problems include malaria, ancylostomiasis, anaemia and enteric diseases. The retting operation exposes workers to parasites and skin infections. Mosquito control, sanitation and safe drinking water are important.

Pesticide poisoning is a hazard in tropical tree production, and pesticides are used in significant quantities in fruit groves. However, palms have few problems with pests, and those that are a problem are unique to specific parts of the life cycle and thus can be identified for specific control. Integrated pest management and, when applying pesticides, following the manufacturer’s instructions are important protective measures.

Medical evaluations have identified cases of bronchial asthma among date workers probably from pollen exposure. Also reported among date workers are chronic dry eczema and “nail disease” (onychia). Respiratory protection should be provided during the pollination process, and workers should wear hand protection and frequently wash their hands to protect their skin when working with the trees and dates.

 

Back

Thursday, 10 March 2011 15:28

Bark and Sap Production

Some text was revised from the articles “Hemp”, by A. Barbero-Carnicero; “Cork”, by C. de Abeu; “Rubber cultivation”, by the Dunlop Co.; “Turpentine”, by W. Grimm and H. Gries; “Tanning and leather finishing”, by V.P. Gupta; “Spice industry”, by S. Hruby; “Camphor”, by Y. Ko; “Resins”, by J. Kubota; “Jute”, by K.M. Myunt; and “Bark”, by F.J. Wenzel from the 3rd edition of this “Encyclopaedia”.

The term bark refers to the multilayered protective shell covering a tree, shrub or vine. Some herbaceous plants, such as hemp, are also harvested for their bark. Bark is composed of inner and outer bark. Bark starts at the vascular cambium in the inner bark, where cells are generated for the phloem or conductive tissue that transports sugar from the leaves to the roots and other parts of the plant and the sap wood inside the bark layer with vessels that carry water (sap) up from the roots to the plant. The primary purpose of the outer bark is to protect the tree from injury, heat, wind and infection. A great variety of products are extracted from bark and tree sap, as shown in table 1.

Table 1. Bark and sap products and uses

Commodity

Product (tree)

Use

Resins (inner bark)

Pine resin, copal, frankincense, myrrh, red resin (climbing palm)

Varnish, shellac, lacquer

Incense, perfume, dye

Oleoresins (sapwood)

Turpentine

Rosin

Benzoin

Camphor (camphor laurel tree)

Solvent, thinner, perfume feedstock, disinfectant, pesticide

Violin bow treatment, varnish, paint, sealing wax, adhesive, cement, soap

Gymnast’s powder

Perfume, incense, plastic and film feedstock, lacquers, smokeless powder explosives, perfumes, disinfectants, insect repellents

Latex

Rubber

Gutta-percha

Tyres, balloons, gaskets, condoms, gloves

Insulators, underground and marine cable coatings, golf balls, surgical appliances, some adhesives, chicle/base for chewing gum

Medicines and poisons (bark)

Witch hazel

Cascara

Quinine (cinchona)

Cherry

Pacific yew

Curarine

Caffeine (yoco vine)

Lonchocarpus vine

Lotions

Emetic

Anti-malaria medicinal

Cough medicine

Ovarian cancer treatment

Arrow poison

Amazonian soft drink

Fish asphyxiate

Flavours (bark)

Cinnamon (cassia tree)

Bitters, nutmeg and mace, cloves, sassafras root

Spice, flavouring

Root beer (until linked to liver cancer)

Tannins (bark)

Hemlock, oak, acacia, wattle, willow, mangrove, mimosa, quebracho, sumach, birch

Vegetable tanning for heavier leathers, food processing, fruit ripening, beverage (tea, coffee, wine) processing, ink colouring ingredient, dyeing mordants

Cork (outer bark)

Natural cork (cork oak), reconstituted cork

Buoy, bottle cap, gasket, cork paper, cork board, acoustic tile, shoe inner sole

Fibre (bark)

Cloth (birch, tapa, fig, hibiscus, mulberry)

Baobab tree (inner) bark

Jute (linden family)

Bast from flax, hemp (mulberry family), ramie (nettle family)

Canoe, paper, loincloth, skirt, drapery, wall hanging, rope, fishing net, sack, coarse clothing

Hat

Hessians, sackings, burlap, twine, carpets, clothing

Cordage, linen

Sugar

Sugar maple syrup (sapwood)

Gur (many palm species)

Condiment syrup

Palm sugar

Waste bark

Bark chips, strips

Soil conditioner, mulch (chips), garden pathway covering, fiberboard, particleboard, hardboard, chipboard, fuel

 

Trees are grown for their bark and sap products either by cultivation or in the wild. Reasons for this choice vary. Cork oak groves have advantages over wild trees, which are contaminated by sand and grow irregularly. The control of a rubber tree leaf rust fungus in Brazil is more effective in the sparse tree spacing of the wild. However, in locations free of this fungus, such as in Asia, plantation groves are very effective for cultivating rubber trees.

Processes

Three broad processes are used in harvesting bark and sap: stripping of bark in sheets, debarking for bulk bark and bark ingredients and the extraction of tree fluids by cutting or tapping.

Bark sheets

Stripping sheets of bark from standing trees is easier when the sap is running or after steam injection between the bark and the wood. Two bark stripping technologies are described below, one for cork and the other for cinnamon.

The cork oak is cultivated in the western Mediterranean basin for cork, and Portugal is the largest cork producer. The cork oak, as well as other trees such as the African baobab tree, share the important feature of regrowing outer bark after its removal. Cork is part of the outer bark that lies beneath the hard outer shell called the rhytidome. The thickness of the cork layer increases year-by-year. After an initial bark removal, harvesters cut regrown cork every 6 to 10 years. Stripping the cork involves cutting two circular and one or more vertical cuts without damaging the inner bark. The cork worker uses a bevelled hatchet handle to remove the cork sheets. The cork is then boiled, scraped and cut into marketable sizes.

Cinnamon tree cultivation has spread from Sri Lanka to Indonesia, East Africa and the West Indies. An ancient tree management technique is still used in cinnamon cultivation (as well as willow and cascara tree cultivation). The technique is called coppicing, from the French word couper, meaning to cut. In neolithic times, humans discovered that when a tree is cut close to the ground, a mass of similar, straight branches would sprout from the root around the stump, and that these stems could be regenerated by regular cutting just above ground. The cinnamon tree can grow to 18 m but is maintained as 2-metre-high coppices. The main stem is cut at three years, and the resulting coppices are harvested every two to three years. After cutting and bundling the coppices, the cinnamon gatherers slit the bark sides with a sharp, curved knife. They then strip the bark off and after one to two days separate the outer and inner bark. The outer corky layer is scraped off with a broad, blunt knife and discarded. The inner bark (phloem) is cut into 1-metre lengths called quills; these are the familiar cinnamon sticks.

Bulk bark and ingredients

In the second major process, bark may also be removed from cut trees in large rotating containers called debarking drums. Bark, as a byproduct of lumber, is used as fuel, fibre, mulch or tannin. Tannin is among the most important bark products and is used to produce leather from animal skins and in food processing (see the chapter Leather, fur and footwear). Tannins are derived from a variety of tree barks around the world by open diffusion or percolation.

In addition to tannin, many barks are harvested for their ingredients, which include witch hazel and camphor. Witch hazel is a lotion extracted by steam distillation of twigs from the North American witch hazel tree. Similar processes are used in harvesting camphor from branches of the camphor laurel tree.

Tree fluids

The third major process includes the harvesting of resin and latex from the inner bark and oeloresins and syrup from the sapwood. Resin is found especially in the pine. It oozes out of bark wounds to protect the tree from infection. To commercially obtain resin, the worker must wound the tree by peeling off a thin layer of the bark or piercing it.

Most resins thicken and harden when exposed to the air, but some trees produce liquid resins or oleoresins, such as turpentine from conifers. Severe wounds are made into one side of the tree wood to harvest turpentine. The turpentine runs down the wound and is collected and hauled to storage. Turpentine is distilled into turpentine oil with a colophony or rosin residue.

Any milky sap exuded by plants is called latex, which in rubber trees is formed in the inner bark. Latex gatherers tap the rubber trees with spiral cuts around the trunk without damaging the inner bark. They catch the latex in a bowl (see the chapter Rubber industry). The latex is kept from hardening either through coagulation or with an ammonium hydroxide fixative. Acid wood smoke in the Amazon or formic acid is used to coagulate raw rubber. Crude rubber is then shipped for processing.

In the early spring in the cold climates of the United States, Canada, and Finland, a syrup is harvested from the sugar maple tree. After the sap starts to run, spouts are placed into drilled holes in the trunk through which sap runs either into buckets or through plastic piping for transport to storage tanks. The sap is boiled to 1/40th of its original volume to produce maple syrup. Reverse osmosis may be used to remove much of the water prior to evaporation. The concentrated syrup is cooled and bottled.

Hazards and Their Prevention

The hazards related to producing bark and sap for processing are natural exposures, injuries, pesticide exposures, allergies and dermatitis. Natural hazards include snake and insect bites and the potential for infection where vector-borne or water-borne diseases are endemic. Mosquito control is important on plantations, and pure water supply and sanitation is important at any tree farm, grove or plantation.

Much of the work with bark stripping, cutting and tapping involves the possibility of cuts, which should be promptly treated to prevent infection. Hazards exist in the manual cutting of trees, but mechanized methods of clearing as well as planting have reduced injury hazards. The use of heat for “smoking” rubber and evaporating oils from bark, resins and sap expose workers to burns. Hot maple syrup exposes workers to scalding injuries during boiling. Special hazards include working with draught animals or vehicles, tool-related injuries and the lifting of bark or containers. Bark stripping machines expose workers to potentially serious injury as well as to noise. Injury control techniques are needed, including safe work practices, personal protection and engineering controls.

Pesticide exposures, especially to the herbicide sodium arsenite on rubber plantations, are potentially hazardous. These exposures can be controlled by following manufacturer recommendations for storage, mixing and spraying.

Allergic proteins have been identified in natural rubber sap, which has been associated with latex allergy (Makinen-Kiljunen et al. 1992). Substances in pine resin and sap can cause allergic reactions in persons sensitive to balsam-of-Peru, colophony or turpentine. Resins, terpenes and oils may cause allergic contact dermatitis in workers handling unfinished wood. Dermal exposures to latex, sap and resin should be avoided through safe work practices and protective clothing.

The disease hypersensitivity pneumonitis is also known as “maple stripper’s lung”. It is caused by exposure to the spores of Cryptostroma corticate, a black mould that grows under the bark, during bark removal from stored maple. Progressive pneumonitis may also be associated with sequoia and cork oak woods. Controls include eliminating the sawing operation, wetting the material during debarking with a detergent and ventilation of the debarking area.

 

Back

Page 2 of 3

" DISCLAIMER: The ILO does not take responsibility for content presented on this web portal that is presented in any language other than English, which is the language used for the initial production and peer-review of original content. Certain statistics have not been updated since the production of the 4th edition of the Encyclopaedia (1998)."

Contents